EN
DFRduino Leonardo with Xbee Socket (Arduino Leonardo Compatible)
CODICE MEPA:
01231149
BRAND:
DFRobot
CODICE PRODUTTORE:
DFR0221
CODICE SKU:
DF-DFR0221
22,26
€
(escl. IVA)
Descrizione completa
Introduction
Featured in Make: The Maker’s Guide to Boards, DFRobot Leonardo with Xbee Socket is compatible with Arduino Leonardo. The "Arduino Leonardo" is based on the ATmega32u4 chip. It is the latest addition to the Arduino family. Compared with the earlier Arduino controllers, using the ATmega32U4 as its sole microcontroller, allows the Leonardo to be cheaper and simpler to use. Also, because the 32U4 is handling the USB directly, code libraries allow the board to emulate a computer keyboard, mouse, and more using the USB-HID protocol! image courtesy of Make Magazine Based on the "Arduino Leonardo", this one from DFRobot equips an XBee socket and 3 sensor extension pins for your application. The Xbee is a commonly used wireless communication module with 2.4G Zigbee,900Mhz version, etc. The socket makes it possible for you to extend the XBee or XBee form factor wifi, Bluetooth, and RF modules for your Arduino directly. However, the D14~D16 extension pins with power supply maximize the use of your ATmega32u4 microcontroller. They support the digital sensors and modules from DFRobot directly. Notice: This board is only supported in the latest Arduino IDE 1.0.1 or later version, so you must update the IDE.
Specification
Projects Project 1. Head-mounted Myoelectric Mouse
Parts in need:
Arduino Leonardo Microcontroller
Gravity: Digital Buzzer for Arduino
Gravity: Analog EMG Sensor by OYMotion
6 DOF IMU Shield For Arduino
Speech Module
Featured in Make: The Maker’s Guide to Boards, DFRobot Leonardo with Xbee Socket is compatible with Arduino Leonardo. The "Arduino Leonardo" is based on the ATmega32u4 chip. It is the latest addition to the Arduino family. Compared with the earlier Arduino controllers, using the ATmega32U4 as its sole microcontroller, allows the Leonardo to be cheaper and simpler to use. Also, because the 32U4 is handling the USB directly, code libraries allow the board to emulate a computer keyboard, mouse, and more using the USB-HID protocol! image courtesy of Make Magazine Based on the "Arduino Leonardo", this one from DFRobot equips an XBee socket and 3 sensor extension pins for your application. The Xbee is a commonly used wireless communication module with 2.4G Zigbee,900Mhz version, etc. The socket makes it possible for you to extend the XBee or XBee form factor wifi, Bluetooth, and RF modules for your Arduino directly. However, the D14~D16 extension pins with power supply maximize the use of your ATmega32u4 microcontroller. They support the digital sensors and modules from DFRobot directly. Notice: This board is only supported in the latest Arduino IDE 1.0.1 or later version, so you must update the IDE.
Specification
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-12V
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Interface: Micro USB
- Compatible with Arduino Uno R3 series pin mapping
- Directly support Xbee and XBee form factor wifi, Bluetooth, and RF modules
- Extend D14~D16 digital pins with 5v power supply
- Clock Speed 16 MHz
- Size: 70x55x14mm (2.76x2.17x0.55")
- Microcontroller Specification
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 800 mA
- Flash Memory 32 KB (ATmega32u4) of which 4 KB used by the bootloader
- SRAM: 2.5 KB (ATmega32u4)
- EEPROM: 1 KB (ATmega32u4)
- DFRobot Leonardo & Xbee R3 x1
- DFRobot Microcontrollers compatible with Arduino Selection Guide
- Wiki (Leonardo with Xbee Socket )
- Atmega32u4 datasheet
- Schematic
- Arduino Leonardo product page
- Latest Arduino IDE
Projects Project 1. Head-mounted Myoelectric Mouse
Parts in need:
Arduino Leonardo Microcontroller
Gravity: Digital Buzzer for Arduino
Gravity: Analog EMG Sensor by OYMotion
6 DOF IMU Shield For Arduino
Speech Module
Immagini aggiuntive