EN
1.75mm PLA (1kg) - Sky Blue(Discontinued)
CODICE MEPA:
012312763
BRAND:
DFRobot
CODICE PRODUTTORE:
FIT0292-SB
CODICE SKU:
DF-FIT0292-SB
39,90
€
(escl. IVA)
Descrizione completa
Introduction
PLA is one of the most environmental-friendly 3D printing material with a wide range of colors.
Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch ,tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.
For this material, it is suggested to be used between 215℃ to 225℃. Test is necessary to find the best temperature for printing.
Specification
PLA is one of the most environmental-friendly 3D printing material with a wide range of colors.
Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch ,tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.
For this material, it is suggested to be used between 215℃ to 225℃. Test is necessary to find the best temperature for printing.
Specification
- Physical Property Typical value
- Tensile Strength@Yield 46Mpa
- Tensile Elongation@Break 20%
- Flexural Strength 70Mpa
- Flexural Modulus 3212Mpa
- Notched lzod lmpact(23℃) 5.2kj/㎡
- HDT@66psi 58℃
- Density 1.31g/cm3
- MFR 10-14g/10min
- Accuracy 1.75±0.1mm
- 1.75mm PLA (1kg) - Sky Blue x1