Adafruit LSM6DSOW 6 DoF Accelerometer and Gyroscope

BRAND: Adafruit
MANUFACTURER CODE: 6573
SKU CODE: AF-6573
Availability: Unavailable Availability (legend)
15,92 € (excl. VAT)
Full description

Behold, the ST LSM6DSOW: The latest in a long line of quality Accelerometer+Gyroscope 6-DOF IMUs from ST.

This IMU sensor has 6 degrees of freedom - 3 degrees each of linear acceleration and angular velocity at varying rates within a respectable range. For the accelerometer: ±2/±4/±8/±16 g at 1.6 Hz to 6.7KHz update rate. For the gyroscope: ±125/±250/±500/±1000/±2000 dps at 12.5 Hz to 6.7 KHz. There's also some nice extras, such as built-in tap detection, activity detection, and pedometer/step counter.

For interfacing, you can use either SPI or I2C - there are two configurable interrupt pins.

The LSM6DSOW is similar to the LSM6DSOX, with the same accelerometer and gyroscope but without the aux. SPI image stabilization port and also does not have a machine learning core / gesture recognizer. If you aren't using the ML or image stabilization capabilities of the DSOX, the 'DSOW is the same sensor for less!

To make getting started fast and easy, we placed the sensors on compact breakout boards with voltage regulation and level-shifted inputs. That way you can use them with 3V or 5V power/logic devices without worry.

We also wrote libraries to help you get these sensors integrated with your Arduino/C++ or CircuitPython/Python boards such as Raspberry Pi or other single board computers.

Additionally, since it speaks I2C you can easily connect it up with two wires (plus power and ground!).  We've even included SparkFun qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder! Just wire up to your favorite micro like the STM32F405 Feather with a plug-and-play cable to get 6 DoF data ASAP. QT Cable is not included, but we have a variety in the shop.